Stratocaster USA Backplate More
Premium product from Japan.
Cover for Fender USA Stratocaster, No holes. Injection-molded.
The cover thickness is 1.7mm. The screw hole diameter is 3mm.
Screws are not included. You need 6 screws. Oval head screws are commonly used, which are partially recessed, and the head still protrudes slightly above the surface. A good choice is 3mmx11.5mm screws.
If you are looking for old Vintage screws, or oval heads with an old-fashioned groove for a flat screwdriver, check out 3mmx12mm screws.
If you want a smooth surface without a protruding head, you need recessed flat-headed screws 3mmx12mm.
If you are choosing a cover for an existing guitar, pay attention to the dimensions! Especially note the spacing of the six mounting screws on your guitar and compare them with our image. The displayed cover matches the screw position of the Fender USA Stratocaster.
If you are looking for a back cover for a Stratocaster with slightly different dimensions than Fender USA, you will also find it in this category.
| Guitar Type | Stratocaster |
|---|---|
| Color | Black |
| Pilot Hole | 1.5mm |
| Made in | Japan |
| For | Tremolo Floyd Rose |